Friend and I just got done installing a P600b on his 89 mustang. First problem is the kit was used and it came with what were supposed to be the correct 12rib belts and pulley system, blower pulley was wrong along with the belts. Second the discharger tube (rubber hose) not only hits the power steering pressure line, but the sway bar mounting bracket. Then third it seems like the blower sits back to far and the inlet tube is kinked trying to make the bend to the fender area. We found an 8 rib belt that would work for length of the pullies (pro charger sent him a new pulley which is SUPOSED to be the 11lb unit.) So after hooking the boost guage up and going out and doing a little WOT testing we only saw 6PSI!!! Thought maybe something wasnt right so I double checked EVERYTHING and everything seems to be correct. We double and tripple checked the blower before installing it to make sure we didnt find any visual problems with it. So here are my questions:
Will not having the 8 rib belt on the 12rib system cause a loss in boost?
Is it a common problem for the discharge tube off the blower to hit so many items?
Is it common for the blower inlet tube to be bent in this manner, and if so how did the majority of you fix this problem?
The tensioner seems to be spring loaded, is this wrong? Is there a certain amount of play or anything you are suposed to have on the belt to have the correct amount of tension on it?
We looked in the installation manual for some of these questions and nothing was in it to help us out.
This is a early cast bracket system, 2 core intercooler, horizontal mount system if that helps you guys out any.
Bookmarks